Mohawk Industrial Werks > Rear Equipment

REAR EQUIPMENT

ALPINEFLEXTILLER

Perfect slope appearance

The AlpineFlexTiller impresses with outstanding performance in all snow conditions. Particular attention was paid to the weight when developing the AlpineFlexTiller and, consequently, its overall weight is very low and the extension and tiller frames are very light. The finishing outrigger ensures perfect alignment with the terrain by means of the “windscreen wiper system” and the large protector unit prevents snow from finding its way onto the tiller or the finished parts of the slope. So the end product is a perfect slope.

Best tilling result

The optimum shafts are responsible for the snow preparation and for transport within the tiller box. In addition, a large tiller pump ensures optimal rotational speed and perfect torque for the AlpineFlexTiller even in the most difficult operating conditions. The powerful shock-absorbers guarantee the tiller’s even contact pressure.

Side flaps

Optional hydraulically foldable side flaps prevent the build up of side embankments and ensure a perfect transition in the case of overlapping grooming. The side flaps are easy to align using the adjustable hydraulic cylinder.

Easy servicing

Easily accessible hydraulic valves on top of the tiller make servicing easier and simplify retrofitting, e.g. of track setters. The stable design of the shafts and the tiller teeth of high-strength fine-grain steel ensures lower wear and tear.

Expert tips

DOWNLOAD

You’ll find more information about the product here.

DOWNLOAD DATA SHEET

VARIOTRACKDESIGNER

Perfect ski-trails for all

Preparation of cross-country ski-trails calls for a great variety of abilities. Do you prepare ski-trails for professional competition athletes or maintain a network of ski-trails for popular sport? Do you create special cross-country ski-trails for children? All these tasks can be now completed by one single device! The VarioTrackDesigner track tiller is the new all-rounder to prepare the world’s cross-country ski-trails!

The VarioTrackDesigner is a track tiller that prepares the snow directely in front of the track-setting pan. Working in unison with the snow tiller, the Vario-TrackDesigner ensures the creation of perfect ski-tracks. And it is also economical, because the snow tiller grooms the surface of the ski-trail, whereas «only» the VarioTrackDesigner – working at speeds of up to 2,000 rpm – goes deeper into the snow, loosening even extremely icy ski-trails. If the track tiller isn’t required, no problem – it can be raised hydraulically. The VarioTrackDesigner’s track-formers can be electrically adjusted from the cabin. This feature enables you to effortlessly prepare special ski-trails for children by simply adapting the track width to the children’s needs and requirements. Or you can easily make the track wider if the ski trails go downhill, thus providing the cross-country skier with more grip when descending. The track tiller follows this adjustment automatically.

Best tilling result

The optimum shafts are responsible for the snow preparation and for transport within the tiller box. In addition, a large tiller pump ensures optimal rotational speed and perfect torque for the AlpineFlexTiller even in the most difficult operating conditions. The powerful shock-absorbers guarantee the tiller’s even contact pressure.

Furthermore, the new VarioTrackDesigner allows you to adjust the track distance. The right-hand track-setting pan can be electrically moved by 600 mm. The VarioTrackDesigner is available either for both track-setting pans or for the right-hand track-setting pan only (left-hand track-setting pan remains standard).

Mode of Operation

When grooming ski-trails, each track-setting pan and the integrated VarioTrackDesigner can be controlled independently from the driver’s seat at the touch of a button, enabling you to decide how many track-setting pans to use when forming your ski-trail: two parallel tracks, or a single track with enough space alongside for skating.

Design

The lifting arms have silent rubber bearings and ensure that the track-setting pans plot an accurate course, even when negotiating bends. The central, multidirectional, rubber-mounted crosshead linkages of the track-setting pans on the lifting arm compensate for uneven ground. The highly abrasion-resistant and electrically adjustable ski-track formers are made of snow-repellent plastic, and their work is aided by two steel pre-cutters. The VarioTrackDesigner, ski-track formers, and pre-cutter are attached to the pan, which is made from aluminum with a snow-repellent coating.

DOWNLOAD

You’ll find more information about the product here.

DOWNLOAD DATA SHEET

TRACK-SETTER

For the PistenBully 100

The preparation of cross-country ski-trails calls for a great variety of abilities. Do you prepare ski-trails for professional competition athletes or maintain a network of ski-trails for popular sport? With our models you can prepare ski-trails with left-hand or right-hand track, and for skating courses with no track up to 3 parallel tracks. The snow tiller loosens the snow, breaks up the ice and reinforces the snow cover.

All models have individually raisable track-setting. You can also choose the VarioTrack Designer, a track tiller that is integrated into the track setting pan directly in front of the ski-trail formers. Working in unison with the snow tiller, the VarioTrack Designer ensures the creation of perfect ski-tracks. If the track tiller is not required, no problem – it can be raised hydraulically. The large clearance furthermore guarantees efficient emptying of the pan, as well as problem-free reversing. Suitable for the PistenBully 100.

Mode of Operation

When grooming ski-trail, each track-setting pan can be controlled independently

rom the driving seat at the press of a switch, enabling you to decide how how many track-setting pans to use when creating your trail. The pressure can be adjusted by a potentiometer. Using the appropriate forming equipment, it is possible to create up to three parallel tracks at the same time.Alternatively, you could form one track and leave enough space alongside for skating. It is possible to adjust the track width for different requirements. The VarioTrack Designer is available either for both track-setting pans or for the right-hand track-setting pan only.

Design

The liftingarms of the track-setting pans have rubber spring elements and ensure that the pans plot an accurate course, even when negotiating bends. The central, multi-directional, rubber-mounted crosshead linkages of the track-setting pans on the lifting arm compensate perfectly for uneven ground. The highly abrasion-resistant track-formers are made from snow-repellent plastic, and their work is aided by two steel pre-cutters. The track-formers and the pre-cutters are attached to the track-setting pan, which is made from plastic.

DOWNLOAD

You’ll find more information about the product here.

DOWNLOAD DATA SHEET

TRACK-SETTER

For PistenBully 400/600

The preparation of cross-country ski-trails calls for a great variety of abilities. Do you prepare ski-trails for professional competition athletes or maintain a network of ski-trails for popular sport? With our models you can prepare ski-trails with left-hand or right-hand track, and for skating courses with no track up to 3 parallel tracks. The snow tiller loosens the snow, breaks up the ice and reinforces the snow cover.

All models have individually raisable track-setting. You can also choose the VarioTrack Designer, a track tiller that is integrated into the track setting pan directly in front of the ski-trail formers. Working in unison with the snow tiller, the VarioTrack Designer ensures the creation of perfect ski-tracks. If the track tiller is not required, no problem – it can be raised hydraulically. The large clearance furthermore guarantees efficient emptying of the pan, as well as problem-free reversing. Suitable for the PistenBully 100.

Mode of Operation

When grooming ski-trail, each track-setting pan can be controlled independently

rom the driving seat at the press of a switch, enabling you to decide how how many track-setting pans to use when creating your trail. The pressure can be adjusted by a potentiometer. Using the appropriate forming equipment, it is possible to create up to three parallel tracks at the same time.Alternatively, you could form one track and leave enough space alongside for skating. It is possible to adjust the track width for different requirements. The VarioTrack Designer is available either for both track-setting pans or for the right-hand track-setting pan only.

Design

The liftingarms of the track-setting pans have rubber spring elements and ensure that the pans plot an accurate course, even when negotiating bends. The central, multi-directional, rubber-mounted crosshead linkages of the track-setting pans on the lifting arm compensate perfectly for uneven ground. The highly abrasion-resistant track-formers are made from snow-repellent plastic, and their work is aided by two steel pre-cutters. The track-formers and the pre-cutters are attached to the track-setting pan, which is made from plastic.

DOWNLOAD

You’ll find more information about the product here.

DOWNLOAD DATA SHEET